Mitsubishi AXiA EX Stand‑In Stacker 1250-2000KG

Mitsubishi AXiA EX Stand‑In Stacker 1250-2000KG

The Mitsubishi AXiA EX stand‑in stacker brings together compact dimensions, strong residual capacity and all‑round operator protection. Designed for intensive warehouse duties, this electric stacker excels in narrow aisles, dock‑to‑rack transfers and medium‑to‑high lifting. By positioning the operator fully inside the chassis, the AXiA EX allows confident manoeuvring where platform or pedestrian stackers run out of space, while keeping the driver clear of impacts and foot traps.

Why choose a stand-in stacker for narrow aisles

Stand‑in stackers combine the tight turning circle of a compact truck with the comfort and speed needed for longer runs. Compared with a walk‑behind or platform model, a stand‑in stacker gives better visibility in both directions, lets the operator keep a stable stance, and typically works in a narrower aisle.

Performance and handling

AXiA EX models cover capacities from 1250–2000 kg and reach lift heights of 3,290–7,000 mm, so they can serve most common pallet racking layouts. The low centre of gravity together with robust support arms keeps residual capacity high at working height. Dynamic power steering makes direction changes quick and predictable, and the driver can fine‑tune the posture and control layout to reduce strain during multi‑hour shifts. Standard travel speed is 10 km/h with an optional 12 km/h setting for longer routes.

For cold logistics and food handling, an AXiA EX cold store version operates down to −10 °C. A deeper package is available for intermittent freezing conditions to −35 °C. Electronics, seals and lubricants are specified for low‑temperature reliability, reducing unplanned stoppages in chill rooms and marshalling areas.

Safety and ergonomics built‑in

Operator confidence is central to productivity. The driver stands inside the truck, protected by the surround structure and overhead guard, which lowers the risk of knocks in busy aisles. An optical presence sensor blocks drive and hydraulics when no operator is detected. The Intelligent Cornering System senses steering angle and progressively reduces speed before the truck reaches the turn. The Enhanced Stability System controls acceleration in sharp corners and automatically reduces travel speed whenever the forks are raised above 1.7 m. These measures support stable handling and fewer racking contacts during peak periods.

Power choices

The AXiA EX can be specified with an integrated lithium‑ion battery to support multi‑shift operation. Li‑ion chemistry delivers high energy efficiency and rapid opportunity charging without performance drop‑off. No daily topping up or equalise charging is required. The battery module incorporates short‑circuit, deep‑discharge and overcharge protection, plus cell‑level temperature and voltage monitoring. A quick 15‑minute top‑up during a break can provide hours of productive time, and a full charge from empty typically takes 1–2 hours.

Controls that match the job

Every warehouse runs differently, so AXiA EX offers packages and options that tailor the truck to the task. The optionally available 360° steering enables fluid turns without end‑stops, especially useful in tight cross‑aisles. With the Level Assistance System, the mast recognises fork position and stops precisely at the selected racking level, speeding up repetitive stacking and helping prevent beam strikes. A laser fork positioning aid gives a clear reference mark on the target level to reduce corrections. Travel, lift and lower responses are precise, helping the operator handle mixed loads with confidence.

The standing compartment is spacious with anti‑fatigue flooring, simple entry, and adjustable controls. The operator can choose a forward‑facing or forks‑trailing stance to suit travel direction. Clear displays keep key information visible without distraction, including speed, battery status and service prompts. PIN‑code login can be configured to manage driver access and performance settings by shift or department.

Mast, chassis and application fit

To match different load sizes and racking heights, AXiA EX offers mast options across the 3,290–7,000 mm range. Chassis footprints remain compact to preserve the truck’s narrow aisle advantage. Support arms and fork dimensions can be configured for the pallet types in use, including Euro‑pallets, half pallets and common industrial formats. For long runs between goods‑in and storage, travel speed settings enhance throughput while the damping of lift and lower movements keeps loads stable at height.

Electrical system and service access

Behind the scenes, the AXiA EX uses efficient AC drive and lift motors with sealed components to minimise maintenance. Service access is straightforward and intervals are designed to fit standard fleet routines. Remote diagnostics and error logging help technicians spot issues early. When equipped with the Li‑ion battery, charging can be scheduled around breaks, removing battery changes from the shift plan and keeping floors clearer.

Technical data

• Capacity class: 1.25–2.0 t (1250–2000 kg)
• Lift heights: 3,290–7,000 mm depending on mast
• Travel speed: 10 km/h, optional 12 km/h
• Operator position: stand‑in, fully within the chassis
• Power: electric, lead‑acid or integrated Li‑ion options
• Control systems: Intelligent Cornering System, Enhanced Stability System, optical presence detection
• Options: initial lift, 360° steering, Level Assistance System, laser fork positioning aid, PIN login, 5V USB socket, custom RAL colour, wheel variants
• Environments: standard indoor, cold store to −10 °C as standard, optional package to −35 °C