Nilfisk SW250 920 Manual Push Sweeper

Nilfisk SW250 920 manual push sweeper for quick everyday cleaning

Loose grit by a doorway, dust in a warehouse aisle and bits of packaging beside a workbench are everyday cleaning jobs. They are also the kind of jobs that rarely justify setting up a powered machine. The Nilfisk SW250 920 lets staff deal with them on the spot. Push it forward and the gear-driven broom system starts sweeping. There is no motor, battery or cable to manage.

This manual sweeper is designed for indoor floors and outdoor spaces. Typical sites include small factories, warehouses and workshops. It can also be used in car parks and around commercial buildings. Its compact form works well where a larger powered sweeper would be more machine than the job requires.

Two side brooms extend the 920 mm working width

The Nilfisk SW250 920 combines one 480 mm main broom with two side brooms. These side brooms reach beyond the centre of the machine and guide dirt towards the main sweeping path. They help beside walls and kerbs, where a narrow central broom alone may leave material behind.

With both side brooms in use, the working width is 920 mm. With the right side broom, it is 700 mm. The broader path suits open aisles and car parks, while the machine remains practical to steer around racks and workstations. Because the brooms turn as the operator pushes, this walk-behind sweeper is ready for a quick clean-up or a planned cleaning round.

Direct-throw sweeping and a 38-litre hopper

The direct-throw system is designed to collect dust, dirt and loose debris as the machine moves forward. Typical material includes grit, sand and small packaging fragments. Nilfisk also lists items such as nails and bolts. The main broom lifts the material into the hopper, so the operator does not need to manage a separate broom and dustpan.

A 38-litre hopper provides useful capacity for regular floor cleaning. Its wide opening can be kept open when larger loose items need to be placed inside or when a small waste bin needs to be emptied. When the hopper is full, the carrying handle makes it easy to lift out and empty. The hopper also remains fitted when the manual push sweeper is stored upright, keeping the machine compact between jobs.

Built-in filter helps control dust

Dry sweeping can disturb fine material, especially on hard floors where dust settles near entrances and production equipment. The built-in filter helps keep dust down during sweeping and improves operator comfort. This makes the unit useful for routine housekeeping when bringing out a larger powered machine would slow the job down.

Fully manual operation keeps setup simple

The brooms rotate through a mechanical gear and belt drive as the operator pushes the machine. No motor, battery or power cable is needed. There is nothing to charge and no cable to route across the floor. The simple construction also keeps servicing needs low, which is useful when several people share the same sweeper.

Manual operation keeps the sound level low. Cleaning can be carried out during the working day with less disruption than a motor-driven machine may cause. For a quick task, the operator can take the floor sweeper from storage, complete the route and empty the hopper without a separate setup stage.

Adjustable handle and easy steering

The push handle adjusts to three positions to suit different operator heights. Its soft grip gives the user a comfortable hold while steering. The handle also folds when the commercial sweeper needs to be transported or stored in a smaller space, which is useful when the unit moves between buildings or travels in a service vehicle.

Large non-marking wheels help the operator push and steer around obstacles. The machine weighs 20 kg, and its rugged, corrosion-proof frame is designed for use both indoors and outside. Together, the wheels and folding handle make this professional manual floor sweeper easier to manage during normal site work.

Specifications

• Power source: manual
• Main broom width: 480 mm
• Working width with right side broom: 700 mm
• Working width with two side brooms: 920 mm
• Main broom productivity, theoretical/actual: 1,920/960 m²/h
• Productivity with one side broom, theoretical/actual: 2,800/1,400 m²/h
• Productivity with two side brooms, theoretical/actual: 3,680/1,840 m²/h
• Hopper volume: 38 litres
• Dimensions (L × W × H): 1,470 × 920 × 1,120 mm
• Weight: 20 kg
• Broom configuration: one main broom and two side brooms
• Handle: adjustable to three positions and foldable
• Dust control: built-in filter