PET Strapping 12.5 × 0.60 mm

PET Strapping for stable loads in storage and transport

When a pallet leaves the warehouse, it is exposed to more than just a straight drive from A to B. Forklift handling, vibration, braking, temperature changes and long storage periods all work against load stability. PET strapping, also called polyester strapping, is designed for exactly these realities. It combines high tensile strength with elasticity, so the strap can absorb shocks and keep pulling the load together instead of cracking or loosening.

Why PET strapping is often chosen instead of steel banding

Steel strapping still has its place, but it is not always the most practical option for warehouse or transport securing. PET strapping is corrosion-free, so it will not leave rust stains on packaging or products. The strap edges are also safer to handle than steel, which helps reduce cut hazards during application and unpacking.

Another key advantage is shock resistance. PET strapping tolerates the sudden impacts that happen during loading, transport and storage. Instead of transferring the full shock into the strap and seal, the material can flex and recover. This is one reason why PET strapping is widely used for pallet securing where loads may settle slightly over time.

In addition, PET maintains tension well during longer storage and through temperature variation. When you need the strapping to stay tight for days or weeks, a strap that keeps its tension helps reduce load shift and the risk of product damage.

Specification

• Material: PET (polyethylene terephthalate / polyester strapping)
• Strap dimensions: 12.5 mm × 0.60 mm
• Tensile strength: 2,900 N
• Length per roll: 2,500 m
• Core size: 406 mm

Tensioning and sealing options

One of the practical benefits of PET strapping is how widely it can be applied: from a single packing station to semi-automated work cells and fully automated strapping lines. The strap can be tensioned with manual, pneumatic or battery-powered strapping tools, depending on your volume and the tension level required.

For closing the strap, two common methods are used:

• Metal buckles or seals: The strap is tensioned and then secured with a metal seal using a tensioner and sealer. This is a straightforward approach for low to medium volumes and mobile work.
• Friction or heat welding: In plastic strapping tools and machines, the overlapping strap ends are welded together. This is common with battery tools and strapping machines and supports efficient, repeatable operation.

Handling, storage and recycling

In daily use, PET strapping is easier and safer to handle than steel because it has no sharp, metal edges. As with any strapping material, safe handling matters: wear suitable gloves, keep hands clear of the tensioning path, and cut straps in a controlled way to avoid snap-back. Store PET strapping rolls in a clean, dry area, protected from unnecessary contamination and damage.

PET is a recyclable material. In many workplaces, used strapping is collected separately to support recycling and keep the work area tidy. Keeping the strapping waste organised also improves safety by reducing trip hazards in packing and dispatch areas.