We supply warehouse, industrial, and archive furniture, as well as forklifts
Forklift traffic cuts tight corners. One misjudged turn can crush a pallet racking upright or damage a machine base. This yellow steel safety bollard is an impact protection post that creates a fixed, visible buffer exactly where traffic runs closest to people and equipment.
The post is built from fully welded steel tube and is bolted to the floor via a welded base plate, creating a sturdy barrier for warehouses, production areas and loading zones. The bright yellow finish improves visibility and helps forklift drivers spot risk points early.
The 8 mm thick 203 x 203 mm base plate is pre-drilled for secure anchoring (4 holes, 114 mm spacing) using M12 x 85 mm wedge anchors. Place a single impact protection bollard to protect a critical corner, or line several to guide vehicle routes and separate work areas.
"*" indicates required fields
This yellow steel impact protection post is designed to take the hit instead of your racking, machinery or building structure. It also creates a clear visual boundary. Drivers see it, slow down and keep the line. In practice, that means fewer bent uprights, fewer damaged machine bases and fewer stop-and-fix moments during the day.
A single forklift contact can turn into a chain reaction: an upright gets pushed, a beam loosens, a pallet load shifts, and the aisle is suddenly closed. The same applies around production equipment and workstations, where even a light bump can damage covers, sensors or cable runs. Placing a warehouse safety bollard at high-risk points reduces those incidents and helps keep traffic predictable. Because this bollard is a stand-alone post, you can position it precisely where you need protection.
The bollard is built from a fully welded steel tube with a high-visibility yellow finish. The tube and base are designed as one rigid unit, so the load from an impact transfers into the floor through the base plate instead of concentrating at a weak joint. For warehouses where trucks move continuously, that sturdy construction makes a real difference over time.
In industrial environments, protective posts are there for one reason: to handle real impacts. Steel construction offers a clear advantage when the same corner gets nudged again and again. Instead of cracking or deforming easily, a welded steel bollard is designed to keep doing its job with minimal attention. That durability supports better forklift safety, because protection measures stay in place rather than being removed for constant replacement.
By installing the right impact protection in your warehouse, you can cut the risk of serious injuries and expensive damage caused by collisions between forklifts (and other vehicles) and your racking, machines, and structures.
Pallet racking protection systems are made to absorb and reduce impact forces from moving vehicles, especially forklifts. A good combination of pallet rack guards and upright protectors helps create a safer, cleaner-running warehouse.
Safety bollards, protectors and bumpers help distribute impact forces so that both the vehicle and the racking system are less likely to be damaged.
Upright protectors for rack uprights in the middle of a rack row are especially useful for preventing hits to the front upright.
Corner guards are a cost-effective way to protect shelving and racking from forklift or pallet impacts. A yellow, steel L-shaped corner guard is a simple and reliable solution for protecting rack corners.
THTT rack end guards for single-sided and double-sided racks, anchored to the floor with wedge anchors, are designed to give strong protection especially at the ends of rack rows. These impact protectors are tested according to SFS-EN standards and are quick to install. Long rack end guards also give the warehouse a tidy, finished look.
Double-sided racks are more exposed because they can be hit from both sides, so end protection is a key part of warehouse safety.
The right height always depends on the location. In high-risk areas, a tall impact barrier is often the best choice. Near lower equipment or in narrow aisles, a low impact barrier can be the safest and most practical option.
The bright yellow colour improves visibility and helps prevent accidents. High-visibility colours like yellow make protected zones easier to spot, even in busy warehouse areas.
Installing both low and tall impact protection is usually quick and straightforward, and the products are easy to bolt into place. These solutions give reliable protection for machines, racks, and equipment in many different work environments — a practical choice for warehouses and industrial sites that need serious collision protection.
Impact protection is used in warehouses to protect racking, machines, traffic routes, and personnel from bumps and collisions. Well-placed safety barriers help prevent accidents, keep operations running smoothly, and extend the service life of your equipment. The most common solutions include column guards, corner guards, and guard rails, installed for example at rack corners or along forklift traffic routes.
Impact protection also helps guide traffic by separating pedestrian walkways from forklift lanes. This can significantly reduce accident risk and makes everyday work flow better. Insurance companies often appreciate clear safety arrangements because they show responsible risk management.
High-visibility colours like yellow, orange, or red improve safety even further by making the protection clearly visible. With quality rack protection in place, you avoid expensive repairs when racking or building structures get hit. Overall, the right impact protection safeguards your people, your racks, your goods, and your equipment, and helps build a safer, more efficient warehouse for everyone.
When choosing impact protection, look at your warehouse layout, forklift routes, and how goods move through the site. This helps you place protection in the most critical points where collision risk is highest. It’s also important to check that the selected protectors meet the required safety standards and load requirements.
For example, plastic protectors can flex during impact and may reduce damage in lighter hits, while steel protection is a strong option for heavy-duty areas with frequent forklift traffic.
During installation, pay attention to proper anchoring to the floor and the correct height for the risk area. It’s smart to inspect and maintain impact protectors regularly, worn or damaged guards won’t protect properly. By investing in the right solutions, you create a safer workplace, reduce accidents, and save money long-term by avoiding repair costs.
If you want help improving warehouse safety and choosing the right solution, contact our sales team at myynti@thtt.fi. Get in touch and we’ll be happy to put together an offer that matches your needs. We’re available on weekdays 8–16 also by phone at +358 2 4310 400. Our professional installation team can take care of the impact protection installations with solid know-how.
Storage and shop furniture
The furnishing concept of Motonet's headquarters and Finland's largest automotive accessories store is practical and durable.
Shelving, Racking and Forklifts
The forklift, automated storage, and furniture solutions for Orion's pharmaceutical packaging and logistics facility in Salo were customized specifically to meet the customer’s needs.
Archive and storage shelving
The University of Turku Library has been modernized, including its material storage facilities
Tuijussuontie 6
21280 Raisio, FINLAND
View on map »
