U-shaped Floor-Mounted Pallet Pull-Out Unit for Pallet Racking,1000 kg

U-shaped floor-mounted pallet pull-out unit for pallet racking – 1000 kg load capacity

If you top up a pallet, pick from it, and then top it up again, you already know where the time goes. The load sits deep in the bay, you lean in, and every repetition adds seconds and strain. This U-shaped floor-mounted pallet pull-out unit, also known as a pull-out pallet cradle, is made for that exact situation. You pull the platform forward and the pallet comes out towards the aisle by 970 mm, so the front edge of the load is immediately within reach of pallet truck or forklift forks.

Faster access when pallets are opened repeatedly

This floor-mounted pallet pull-out unit is a practical solution for fast movers, spare parts, assembly supply, packaged goods for dispatch, seasonal products and consumables. When the same pallet is filled and emptied several times during a shift, reaching to the back of the bay becomes a bottleneck. By pulling the pallet forward almost a metre, you get a clearer working position and a better view of what is left on the pallet.

U-profile floor rails

The defining feature of this model is the U-shaped construction and the U-profile floor rails. The floor-mounted pull-out unit is intended to be filled and emptied with a pallet truck. The rails guide the forks directly under the pallet, helping you line up quickly without lifting or searching for the right entry point.

Stable floor anchoring and mechanical locking

Because this is a floor mounted pull-out unit, it is fixed to the floor. That anchoring is the key to stability: it helps prevent tipping and keeps the movement aligned when the unit is fully extended. It also makes the pull-out action feel controlled, which matters when you work with a full pallet close to the aisle.

A mechanical locking mechanism secures the pull-out unit in both end positions. It locks when pushed in for storage and also locks when pulled out for loading or picking. The lock reduces unwanted movement if the platform is nudged by pallet truck forks and keeps the working position steady while you pick items from the pallet.

Industrial construction for demanding storage areas

The U-profile rails are made from hot-dip galvanised steel. The galvanised surface helps the unit cope with moisture, dust and changing temperatures in everyday warehouse use. It is suitable for locations such as cold rooms and outdoor-covered storage areas where conditions are not always clean and dry. The pull-out movement is supported by ball-bearing rollers designed to roll smoothly even when fine dust or small debris is present on the floor.

EUR and FIN versions with the same pull-out length

This pallet pull-out unit is available in two widths depending on the pallet format used in your operation. Both versions share the same depth, the same pull-out length and the same low build height, so your workflow stays consistent across bays.

EUR

• Overall width: 855 mm
• Maximum load width: 820 mm
• Depth: 1200 mm
• Pull-out length: 970 mm
• Overall height: 70 mm
• Handle height: 500 mm
• Load capacity: 1000 kg

FIN

• Overall width: 1055 mm
• Maximum load width: 1020 mm
• Depth: 1200 mm
• Pull-out length: 970 mm
• Overall height: 70 mm
• Handle height: 500 mm
• Load capacity: 1000 kg