Workshop Repair Workstation 2

Workshop Repair Workstation 2 – heavy-duty workbench for maintenance, repair and production

The Workshop Repair Workstation 2 is a purpose-built heavy-duty workbench designed for demanding maintenance, assembly and production work. It pairs a thick steel worktop with a rigid, powder-coated steel frame in light grey RAL 7035. With a 750 kg total load capacity and height-adjustable legs from 750 to 1000 mm, it provides the stability, ergonomics and configurability professionals expect from an industrial station.

Stable base with a 50 mm steel worktop

The 50 mm steel worktop resists hot swarf, oil and point loads from heavy components. It provides a flat, durable surface that keeps fasteners, fixtures and service parts under control. Paired with a welded, braced frame in RAL 7035, the bench maintains alignment under load so precision operations remain repeatable.

Adjustable height for efficient, safer work

Operators differ and tasks change over a shift. The legs adjust smoothly between 750–1000 mm, allowing a comfortable, neutral posture for seated or standing work. Setting the correct height reduces reach, supports better force application and helps minimise fatigue. For teams that share stations, the ability to re‑set height in seconds is a practical advantage over fixed tables and a key benefit of an adjustable height workbench.

Tool control with drawers and a full-width pegboard

Below the top, three steel drawers run on ball-bearing slides for reliable, quiet motion. Two shallow drawers are ideal for bit cases, fasteners and service kits; the deep drawer takes torque wrenches, pneumatic tools and calibration gear. A central locking system keeps the contents secure between shifts. Above the work surface, a full‑width pegboard back panel (perforated tool panel) puts hooks, bins and wire shelves in one clear view. This workbench with pegboard and drawers keeps frequently used tools visible yet secure. With every spanner and driver having a defined location, retrieval is faster and return-to-place becomes routine.

Built for real industrial use

This is not a light hobby table. The frame and top combination is engineered for a 750 kg load and for everyday exposure to oils and impact. The powder-coated finish in RAL 7035 stands up to workshop conditions and integrates cleanly with existing equipment. Dimensions of 1500 x 750 mm strike a practical balance: enough depth for engine subassemblies and jig plates, yet compact enough to fit service bays and cell layouts.

Applications that suit the Workshop Repair Workstation 2

Typical uses include mechanical repair, component rebuilds, gearbox and pump service, hydraulic maintenance, electrical panel assembly, and general MRO kitting. In production, the station functions as a robust maintenance bench or as a versatile workshop bench for changeover tooling and fixtures. The combination of drawers, pegboard back panel and adjustable height suits both one‑off diagnostics and repeatable assembly tasks.

Fast, tidy setup with proven accessories

The bench is delivered ready for straightforward installation. It accepts a comprehensive range of accessories so you can configure a workbench with drawers and tool panels for your process. Add lighting frames to improve visibility, fit power and compressed‑air rails to bring services to the point of use, route leads into cable trays to remove trip hazards, and place auxiliary shelves for parts staging. The workstation is compatible with a broad selection of Treston accessories so you can scale and adapt the layout as requirements change.

Ergonomics and productivity in everyday use

Small details compound into throughput. A correctly set adjustable height workbench keeps elbows close to the body, reducing strain during pressing, crimping or torqueing. Drawers with clear dividers cut search time for fasteners. A labelled pegboard back panel accelerates tool return and helps new team members find the right implement without asking. Together, these features shorten cycle times and help maintain 5S standards without constant supervision.

Durability and care

The steel worktop is easy to keep clean with standard workshop practices. Wipe down oils and coolants, and protect the surface with removable cutting mats if required. Because the frame finish is a resilient powder coat in RAL 7035, occasional scuffs can be touched up with colour‑matched paint. The robust build of this industrial workbench means fewer replacements and predictable service life in busy shops.

What’s included

• Frame and legs in powder-coated steel, RAL 7035
• 50 mm steel worktop sized 1500 x 750 mm
• Three steel drawers on ball-bearing slides with central locking
• Full-width pegboard back panel (perforated tool panel)

Options and expandability

Configure your station with additional drawer units, lighting frames, power rails, compressed‑air rails, cable management, and auxiliary shelves. Components are designed to integrate cleanly so you can scale from a single station to a line of coordinated cells. Accessories are available separately and allow the heavy-duty workbench to evolve as processes change.

Lean, 5S and visual management

A tidy bench is faster and safer. The full‑width pegboard back panel supports shadow boards and colour coding, reinforcing 5S routines. With the same hook types across stations, tools return to the same locations every time, improving audit scores and reducing walk time. Label rails and bin strips help operators stage parts in the order of use, and the workbench with drawers keeps seldom‑used gauges secure but reachable.

Load capacity you can trust

The specified 750 kg total load capacity is sized for typical industrial service work: fixtures, motors, actuators, valve skids and heavy jigs. Because the frame is steel and the top is a solid steel worktop, the bench resists point loads from vises and presses better than chipboard tops. When planning processes, place high‑load operations centrally on the top and keep dynamic loads within rated values.

Footprint and layout

At 1500 x 750 mm, the bench fits single‑bay service areas, test benches and maintenance corridors. The depth gives room for vises, power rails and tool stands without crowding the working area. Multiple benches can be spaced to create flow‑through cells; the adjustable height workbench design makes it easy to standardise working postures across the cell while accommodating operator preference.

Safety notes

Always lock the drawers before moving heavy items on the top, and use the central locking to prevent access when unattended. On the pegboard back panel, choose hooks with appropriate load ratings and ensure bins are clipped to prevent accidental drops. Where required, add edge guards or mats to protect delicate components placed on the steel worktop.

Technical specifications

• Size (W × D): 1500 x 750 mm
• Top thickness and material: 50 mm steel worktop
• Leg adjustment range: 750–1000 mm
• Total load capacity: 750 kg
• Frame: powder-coated steel, light grey RAL 7035
• Equipment: 3 drawers with central locking, full‑width pegboard back panel
• Options: additional drawer cabinets, lighting frames, electrical and compressed‑air rails, cable trays, auxiliary shelves
• Compatibility: wide range of Treston accessories

Why choose this heavy-duty workbench

If you are standardising benches across a service bay, building an MRO cell, or replacing tired tables, the Workshop Repair Workstation 2 gives you a dependable platform with the fundamentals done right: a serious load rating, a durable steel worktop, secure storage, a full‑width tool panel and the ergonomics of an adjustable height workbench. It is a practical choice when uptime, order and longevity matter.