Treston M1500 Perforated Back Panel

Treston M1500 perforated back panel – ESD tool storage for a 1500 mm workbench

The Treston M1500 perforated back panel is a practical way to create organised tool storage on the rear edge of a 1500 mm industrial workbench. It gives tools, measuring devices and small accessories a clear place above the work surface, so the bench top stays open for the actual job. A workbench often becomes crowded when the same tools are used again and again. Screwdrivers, pliers, cutters, tape rolls, gauges and other frequently used items can quickly take over the surface. A perforated tool panel moves those items from the table to the back of the workstation. The operator can see what is available, take the right tool without searching through drawers, and return it to the same place after use.

More usable worktop space with a perforated back panel

The main benefit of the Treston M1500 perforated back panel is the extra working space it creates. The panel does not increase the footprint of the workbench, yet it adds a vertical storage area for tools and equipment. Because the tools are lifted into the operator’s line of sight, the workstation becomes easier to keep in order. Missing tools are noticed faster, and the correct item is easier to identify. The panel also helps standardise workstations, because the same tool layout can be repeated on several benches.

Designed for Treston M1500 workbench modules

This light grey perforated back panel is designed for the M1500 module, which is used with 1500 mm wide Treston workstation layouts. It is suitable for Treston Concept, Concept Ergo, TP, TED and QuatreX workbenches when the bench is equipped with the correct upright tubes. The panel is fastened to the upright tubes at the rear of the bench, creating a stable tool wall directly behind the work area.

The actual panel size is 1478 mm wide, 16 mm deep and 389 mm high. This gives a broad storage surface while keeping the height moderate, so the panel can be combined with other workstation accessories where the bench layout allows. Before ordering, it is always worth checking that the workbench uses the M1500 module and that the required upright tube structure is present.

9 x 9 mm perforation for hooks and tool brackets

The square perforation pattern is made for flexible tool placement. The hole size is 9 x 9 mm, with 38 mm centre-to-centre spacing. This common industrial layout makes it easy to position suitable hooks, holders and brackets according to the tools used at the workstation. When the work process changes, the layout can be adapted by moving the accessories instead of changing the whole bench setup.

ESD protected for electronics work areas

The Treston M1500 perforated back panel is an ESD protected model. It is therefore suitable for workstations where electrostatic discharge control is part of the working environment, such as electronics assembly, inspection, testing and repair. In an EPA area, the whole workstation must be considered as a system, and using ESD compatible furniture and accessories helps keep the setup consistent.

Light grey powder-coated steel for industrial use

The panel is made from epoxy powder-coated steel and finished in light grey RAL 7035. The neutral colour fits well with Treston industrial furniture and keeps the workstation visually calm. Steel construction gives the panel the rigidity needed for repeated daily use. Hooks and holders can be repositioned when the work changes, and the panel remains a clear, simple storage surface. The powder-coated finish is intended for professional work environments where furniture must be easy to keep clean and suitable for continuous use.

Technical data

• Product: Treston M1500 perforated back panel, light grey ESD
• Module: M1500, for 1500 mm Treston workbench layouts
• Dimensions: 1478 x 16 x 389 mm
• Material: epoxy powder-coated steel
• Colour: light grey, RAL 7035
• Perforation: 9 x 9 mm square holes, 38 mm centre-to-centre spacing
• ESD: yes
• Mounting: fastened to Treston upright tubes