Office Trolley RT 331/2MP/1H+Ti+V

Office Trolley with Folding Ladder RT 331/2MP/1H+Ti+V

High archive shelves are useful until the folders you need are just out of reach. The RT 331/2MP/1H+Ti+V solves that everyday problem by combining a two-shelf office trolley with a fold-up ladder in one mobile unit. This office trolley with folding ladder is a practical choice when a separate trolley and step ladder would take up too much space. The trolley moves documents and supplies through narrow working areas, then gives controlled access to higher archive shelves when the ladder is lowered for use. After use, the ladder can be raised back up, so the unit stays compact for transport and storage.

Two large melamine shelves for daily office loads

The trolley has two melamine shelves for binders, document boxes, printer paper, folders and other dry office materials. Each shelf measures 800 x 620 mm, giving enough surface area for larger paper loads while keeping the trolley easy to handle in normal indoor working areas. The lower shelf is 185 mm from the floor, which keeps the load low enough for stable movement and gives useful space for heavier items that should not be lifted high.

Melamine is a good surface material for an office trolley because it is smooth, firm and easy to keep tidy in everyday use. It suits document handling, archive work and light storage tasks where the load is normally clean and dry. The two-level layout also helps separate work: one shelf can be used for folders that are going to the archive, while the other can hold items coming back to the office or library desk.

Fold-up ladder for high archive and library shelves

The integrated fold-up ladder is the feature that makes this model different from a standard shelf trolley. When binders or boxes are stored on higher shelves, the ladder can be lowered from the end of the trolley and used for access. The ladder locks into place for use, helping the user work with more confidence when reaching for files above normal arm height.

Electro-galvanised steel frame for long service life

The frame is made from electro-galvanised steel. This finish increases the service life of the trolley and helps protect the steel structure from wear in regular indoor use. The frame gives the two shelves a firm base and keeps the trolley steady when it is loaded within its stated capacity. Total load capacity of 100 kg is suitable for many office and archive tasks, such as moving several boxes of copy paper, file folders or mixed document loads. The trolley itself weighs 24 kg without load, which gives it a solid feel without making it unnecessarily heavy to move when empty.

Push handle and solid rubber wheels for smooth movement

A 950 mm high push handle gives a natural grip height for moving the trolley while standing. The handle helps guide the trolley through aisles, office corridors and storage rooms without needing to pull from the shelves or the ladder structure. The office trolley runs on Ø 100 mm solid rubber wheels with needle bearings. Solid rubber is a practical wheel material for indoor transport because it supports controlled movement and does not require air pressure. The needle-bearing construction helps the wheels roll more easily under load.

Technical data

• Shelves: 2 melamine shelves
• Shelf size: 800 x 620 mm
• Lower shelf height from floor: 185 mm
• Push handle height: 950 mm
• Ladder: integrated fold-up ladder, locks into place for use
• Frame: electro-galvanised steel
• Wheels: needle-bearing solid rubber wheels, Ø 100 mm
• Load capacity: 100 kg, evenly distributed
• Unladen weight: 24 kg
• Origin mark: Finnish Key Flag product