The U-shaped low-profile lift table provides a practical way to raise palletised loads weighing up to 1,000 kg. Its open-centre platform allows a standard hand pallet truck to place a pallet directly onto the lift table. With a minimum height of only 85 mm, the unit can be installed at floor level without an access ramp or pit.
Designed for material handling in warehouses and logistics areas, the lift table brings palletised or compatible container loads to a suitable working height within its 85–860 mm range. The steel plate platform measures 1,450 × 1,140 mm, while the clear opening between the platform arms is 590 mm.
A separate IP54-rated hydraulic unit is positioned next to the table. The 1.1 kW lifting motor uses a 380 V / 50 Hz three-phase supply, with a stated connection of 380 V / 16 A. The U-shaped low-profile lift table has a 1,000 kg load capacity and is designed for heavy-duty pallet handling. It complies with EN 1570-1 and ANSI/ASME standards.
"*" indicates required fields
This U-shaped low-profile lift table is designed for loads of up to 1,000 kg in warehouses, logistics areas and other industrial workplaces. It raises palletised goods from a closed height of 85 mm to a maximum platform height of 860 mm, allowing the load position to be adjusted to suit the task.
The open-centre platform is the key feature. A standard hand pallet truck can enter the 590 mm-wide opening and place a compatible pallet directly onto the lift table. This gives straightforward access at floor level and removes the need to guide the pallet up a separate ramp. A pit is not required either, so the table can be installed on the floor where its dimensions and power requirements suit the intended working area.
A conventional closed-platform lift table may need a ramp when pallets are loaded with a hand pallet truck. The ramp takes up additional floor space and introduces an incline during loading. With this U-shaped design, the pallet truck moves into the centre opening while the platform arms support the pallet once it has been lowered into place.
The 85 mm minimum platform height keeps the loading position close to floor level. This is useful when structural alterations for a pit are not practical or desirable. It also helps the lift table fit into an existing warehouse or logistics layout with fewer changes around the loading point.
The lift table can raise a load through a broad working range. Instead of handling every item from floor level or from the fixed height of a pallet, the load can be positioned closer to the level needed for the work. The adjustable range is useful when goods are loaded onto or removed from a pallet over several stages.
The platform is made from steel plate and is intended for heavy-duty use. Its 1,450 mm length and 1,140 mm width provide the supporting surface around the open centre. This construction is suited to regular pallet handling where a robust lifting point is needed in a warehouse or logistics process.
The U-shaped low-profile lift table can also be considered for compatible container loads, provided their base dimensions and support points suit the platform. The opening simplifies access for the pallet truck, but the load still needs proper support.
The hydraulic unit is separate from the lift table and is positioned beside it. Its enclosure is rated IP54. The lifting motor is rated at 1.1 kW and 380 V / 50 Hz, and the specified electrical connection is three-phase, 380 V / 16 A.
Storage and shop furniture
The furnishing concept of Motonet's headquarters and Finland's largest automotive accessories store is practical and durable.
Shelving, Racking and Forklifts
The forklift, automated storage, and furniture solutions for Orion's pharmaceutical packaging and logistics facility in Salo were customized specifically to meet the customer’s needs.
Archive and storage shelving
The University of Turku Library has been modernized, including its material storage facilities
Tuijussuontie 6
21280 Raisio, FINLAND
View on map »
