Everest EFA 2E Fibreglass Extension Ladder

Everest EFA 2E fibreglass extension ladder for electrical and industrial work

Electrical hazards or chemical exposure can make an ordinary metal ladder the wrong choice. The Everest EFA 2E fibreglass extension ladder is built for jobs like these: professional construction, installation and maintenance where adjustable reach and an insulating ladder construction are required. Its two sections extend for work at height and slide back together for transport and storage.

GRP construction for electrical work and chemical environments

Glass-fibre-reinforced plastic, commonly known as GRP, is used for both the stiles and the 30 × 30 mm rungs. The ladder therefore has an insulating climbing structure rather than metal rungs between GRP side rails. This construction supports the stated electrical rating and provides the material resistance needed in many industrial and process settings. The design is intended for repeated professional use. Its chemical resistance is useful in maintenance areas where the equipment may encounter splashes or airborne contaminants.

Approved for live working at specified voltages

The Everest EFA 2E is approved for live working up to 1,000 V AC and 1,500 V DC. It meets the high-voltage test for ladders made from insulating material in accordance with DIN EN 61478 or VDE 0682 Section 6.5, Category 1/30 kV. The product also complies with EN 131 Professional and carries TÜV-SÜD certification.

Precise height adjustment without unnecessary bulk

As a double extension ladder, the Everest EFA 2E adjusts from rung to rung at 280 mm intervals. The working length can therefore be matched closely to the task. This helps when moving between service points at different heights or when a longer fixed ladder would be awkward to transport and store.

For the 2 × 8-rung model, the ladder measures 2.44 m when retracted and 4.17 m when fully extended. Its transport dimensions are 2,500 × 430 × 125 mm, making it practical to plan vehicle space and on-site storage before purchase.

Stable positioning and manageable handling

The lower ladder has an external width of 420 mm. A wide 0.8 m crosspiece supports the 2 × 8-rung version, helping to create a stable base when the ladder is set on a suitable, level surface. Replaceable two-component end caps provide a slip-resistant contact point and can be renewed after wear instead of requiring replacement of the whole ladder.

At 14.3 kg, the 2 × 8-rung model remains manageable for a professional GRP ladder of this reach. Its relatively low weight helps when unloading, carrying and positioning the ladder during a normal maintenance round.

Technical data