Open-Hole Rubber Ring Mat, 13 mm

Open-hole rubber ring mat for demanding access areas

Busy entrances and industrial walkways quickly collect water, sand and loose dirt. This black rubber ring mat provides a practical surface for such areas while adding a durable layer between footwear and the floor. Its open pattern lets moisture and debris pass through the holes, and its moulded bevelled edges create a smoother transition at the sides.

Open-hole surface allows moisture and debris to pass through

The ring pattern is the defining feature of this open-hole rubber mat. Water, melting snow, sand and other loose debris can move below the walking surface rather than remaining on top. This helps keep the upper surface clearer in places where dirt is carried in on footwear. It also makes the mat a useful rubber entrance mat for doorways and lobbies, as well as a drainage mat for industrial access routes exposed to occasional moisture.

Because the construction is open, the mat does not contain liquids. Moisture and debris collect underneath and should be removed as part of routine floor care. Lift the mat when cleaning the area, clean both the mat and the floor, and allow the surfaces to dry before putting it back. Regular cleaning helps prevent accumulated dirt from affecting how evenly the mat lies.

NBR/SBR rubber for demanding use

The mat is made from a durable NBR/SBR rubber material. This combination gives the rubber ring mat the strength and wear resistance needed in busy commercial and industrial settings, while the stated oil resistance supports use in areas where occasional oil contact may occur. It is a practical oil-resistant rubber mat for workshops, maintenance areas and industrial entrances where an ordinary entrance mat may not be suitable.

Bevelled edges help reduce trip hazards

All transitions around a floor mat deserve attention, especially on routes with frequent foot traffic. The integrated bevelled edges reduce the abrupt height difference between the floor and the 13 mm mat. They help people notice and step onto the mat more naturally, reducing the risk of catching a foot on a square edge.

Suitable for indoor and outdoor areas

The operating temperature range is -30°C to +60°C, making this outdoor rubber mat suitable for both indoor and outdoor placement within the stated limits. The one-piece format is easy to position at a defined access point, and the black colour fits naturally into warehouses, workshops and public-facing entrances.

Typical applications for the industrial rubber mat include:

• Entrance lobbies and building doorways
• Stairwells and landing areas
• Warehouse and factory access routes
• Workshop and maintenance-area entrances
• Public indoor areas where tracked-in dirt and moisture need to pass below the walking surface

Ready-sized 910 x 1520 mm rubber ring mat

At 910 x 1520 mm, the mat covers a clearly defined doorway or work-area entrance without requiring sections to be joined. It is 13 mm thick and weighs 10 kg per piece. Before ordering, measure the available floor area and check door clearance so that the mat can lie flat without interfering with doors, thresholds or nearby equipment.

Specifications

• Product type: open-hole rubber ring mat
• Material: NBR/SBR rubber
• Oil resistance: yes
• Colour: black
• Dimensions: 910 x 1520 mm
• Thickness: 13 mm
• Weight: 10 kg per piece
• Operating temperature: -30°C to +60°C
• Use: indoors and outdoors
• Edges: moulded and bevelled