Treston ESD Bench Mat

Treston ESD bench mat for electronics workstations

Handle sensitive electronic components on a suitable work surface with the Treston ESD bench mat. Designed for use in an electrostatic protected area (EPA), it covers the tabletop with a surface that supports controlled static dissipation when correctly grounded. This mat resists heat, solder splashes and solvents, and its roughened underside helps keep it in position.

Static control and resistance to ground

The specified resistance to ground is 7.5 × 10⁵–10⁷ Ω, equivalent to 0.75–10 MΩ. This figure describes the electrical resistance from the working surface to ground. With suitable grounding, the static dissipative work surface provides a path for charge to dissipate. That function matters wherever sensitive electronic parts come into contact with the bench.

ESD table matting supplied by the metre or in rolls

The 1220 mm material width is equivalent to 1.22 m. A full roll is 10 m long, giving a total material area of 12.2 m². Supply by the metre provides a practical option when the amount needed is smaller than a complete roll. A whole roll is useful when planning material for several workbenches or a longer work area.

Heat and solvent resistance for bench work

Solder splashes are a familiar exposure at electronics assembly and repair benches. The Treston mat is resistant to these splashes, as well as heat and solvents. Treston specifies a maximum continuous operating temperature of 60°C.

Roughened underside and PVC-free composition

The underside is roughened to help prevent the mat from moving across the tabletop. A mat that stays in position is easier to work around when parts and tools are moved during assembly or inspection. This feature addresses the contact between the mat and the table underneath it.

Technical data

• Brand: Treston
• Manufacturer’s product code: PM157
• Application: bench surface in electrostatic protected areas
• Width: 1220 mm
• Full roll length: 10 m
• Supply format: by the metre or as a complete roll
• Resistance to ground: 7.5 × 10⁵–10⁷ Ω
• Standard: EN 61340-5-1
• Maximum continuous operating temperature: 60°C
• Resistance properties: heat, solder splashes and solvents
• Underside: roughened to help prevent sliding
• PVC content: none