Two-Shelf ESD Table Trolley

Two-shelf ESD table trolley for electronics production

Static-sensitive parts do not stay at one workstation. They move from stores to assembly, from assembly to inspection and from inspection to the next process. This two-shelf ESD table trolley provides a dedicated mobile surface for those transfers. It combines dissipative shelf mats, a compact footprint and a 150 kg total static load capacity in a format that is straightforward to use in day-to-day production.

The trolley is intended for workplaces where electrostatic discharge needs to be controlled. It is suitable for moving electronic components, assemblies, instruments and compatible containers within an established ESD control process. The open design keeps both shelves visible and accessible, while the handle at one end leaves more usable space on the upper level.

Dissipative shelf mats support ESD-controlled handling

Each shelf is fitted with a dissipative mat. The surface helps limit the build-up of static charge when sensitive items are placed on the trolley or moved between work areas. This makes the ESD trolley a practical link between fixed ESD workstations, storage points and inspection areas.

Heat-resistant mats for demanding work areas

The dissipative mats withstand temperatures up to 400°C. This provides useful heat resistance in production areas where heated tools or recently processed parts may be present. Operators should still follow the applicable work instructions and confirm that each item is suitable for placement on the mat.

Heat resistance is especially useful when one mobile unit serves several process stages. Components can remain on an ESD-compatible surface during transfer, without changing to a general-purpose trolley between tasks. That helps keep handling routines clear and reduces unnecessary movement from one surface to another.

Two shelves make better use of a compact footprint

The ESD table trolley measures 850 mm long, 435 mm wide and 950 mm high. Each shelf measures 760 x 440 mm. The compact width helps the trolley fit into production routes where space around benches and machines is limited, while the two levels provide separate areas for loads.

There is 515 mm between the shelves. The lower shelf is positioned 220 mm above the floor, and the upper shelf is 720 mm high. This layout gives the lower level enough clearance for taller boxes or equipment and keeps the top shelf at a practical height for frequent access. The two levels can also be used to separate incoming items from completed work, provided the site’s own identification and ESD procedures are followed.

One-sided handle leaves the upper shelf open

The push handle is mounted at one end rather than surrounding both ends of the trolley. This simple arrangement creates a more open upper loading surface. Larger cartons or equipment can be positioned without a second handle taking up space at the opposite end.

The handle provides a clear point for pushing and steering. Because the load remains visible, the operator can check its position before moving the trolley. Loads should always be stable, evenly distributed and kept within the stated limits. A maximum of 75 kg may be placed on each shelf, and the total static load capacity is 150 kg.

Four swivel castors for easy positioning

Four 100 mm swivel castors allow the ESD shelf trolley to turn and be repositioned in confined work areas. This all-swivel layout is useful when approaching a bench from different directions or moving the trolley aside after a delivery.

Two versions are available:

• The KM172-ESD has four swivel castors without brakes.
• The KM172-ESDB also has four swivel castors, with brakes on two of them.

Electro-galvanised construction for industrial use

The frame has an electro-galvanised finish and supports two ESD shelves. Its open construction makes it easy to see what is stored on the lower level and provides access from more than one side. The trolley has a net weight of 20 kg, which should be considered when planning the full moving load and manual-handling routine.

Specifications

• Brand: Kongamek
• Models: KM172-ESD without brakes and KM172-ESDB with two braked castors
• Overall dimensions: 850 x 435 x 950 mm
• Shelf dimensions: 760 x 440 mm
• Number of shelves: 2
• Distance between shelves: 515 mm
• Height to lower shelf: 220 mm
• Height to upper shelf: 720 mm
• Total static load capacity: 150 kg
• Maximum shelf load: 75 kg
• Castors: 4 swivel castors, 100 mm diameter
• Finish: electro-galvanised
• Net weight: 20 kg
• ESD surfaces: dissipative shelf mats
• Mat heat resistance: up to 400°C
• Approval: SP approved